| Content | Made in polyethylene with washable internal part made in EVA (kind of rubber) fixed to structure by plastic rivets.
With a tracheal hole, removable chin support and velcro fastener.
X-ray translucent.
Available in 6 sizes differentiated by safety closure colour or in a set of 6 in a bag.
 | No pinch single cone cuff, full autoclavable
- no pinching, no damage to the skin
- lower pressure compared to normal cuff (about 50 mmHg lower)
- no leaking (main reason for lower pressure)
• Single cone cuff, no pinch
• Dimensions: 90 x 12 cm
• Size: L (THIGH)
Spare part for:
PNEUMATIC TOURNIQUET DTS-3000 (code 33138)
PNEUMATIC TOURNIQUET DTS-2000S (code 33152)
PNEUMATIC TOURNIQUET DTS-2000W (code 33154)
| Rescue Life is an external defibrillator with monitor. It is designed to be used by out-of-hospital and hospital users.
Lightweight, transport facility, attractive line, ergonomic shape, studied in every details. It is a complete acute cardiac care response system designed for Basic Life Support (BLS) and Advanced Life Support (ALS) patient management protocols.
The IPX4 standard permits the operation under adverse climatic situations.
Rescue Life is totally MADE IN ITALY.
SpO2 and pacemaker
Range includes models with pacemaker and SpO2. ECG module for monitoring (not for diagnosis) includes up to 12 derivations standard 5 leads patient cable (for I, II, III, aVL, aVR, aVF) or optional 10 leads patient cable (for 12 derivations).
NIBP
The NIBP option is focused on advantage A+ module of SunTech Medical that provides the highest NIBP performance during movements. Suitable for adult, pediatric and neonatal.
High contrast TFT LCD colour display 5.7" or 7" (Rescue Life 7)
Bright, high contrast, wide-angle colour display for simultaneous view of up to 12 ECG channels
Data management
The memory is based on a flash disk of 4 GB for 300 recorded hours for all AED models
Asynchronous and synchronous
- in asynchronous defibrillation, Rescue is advised on patients with the following symptoms: unconsciousness, absence of normal breathing and lack of detectable pulse.
- in synchronous defibrillation, Rescue Life is advised on patients with ECG's reporting Atrial Fibrillation.
3 operation modes: manual, AED, Advisory
- in manual mode RESCUE LIFE is intended for use by doctors and trained individuals. Only 3 steps: energy selection from 1 to 230J, energy charge and shock.
- in AED mode, RESCUE LIFE is intended for use by personnel authorized by a physician or medical director. The voice prompts and display messages are assisting the operator during CPR operations, charging automatically to 150J when a shock-able ECG rhythm is detected.
- in advisory Mode, the system alerts when the shock is necessary leaving the energy level and charging choice to the operator.
Initialising and system test at switching on of the device.
Auto test and fault recognition.
| Designed to effectively train emergency responders to the use of RESCUE SAM, thanks to simple, clear, spoken and visual instructions.
5 pre-programmed scenarios selected directly by the remote control.
Totally safe real shock simulation.
Supplied with remote control, training pads, battery charger.
| Description not available. | No pinch single cuff, full autoclavable
- no pinching, no damage to the skin
- lower pressure compared to normal cuff (about 50 mmHg lower)
- no leaking (main reason for lower pressure)
• Single cuff, no pich
• Dimensions: 80 x 9 cm
• Size: M (THIGH)
Spare part for:
PNEUMATIC TOURNIQUET DTS-3000 (code 33138)
PNEUMATIC TOURNIQUET DTS-2000S (code 33152)
PNEUMATIC TOURNIQUET DTS-2000W (code 33154)
|
| Additional information |
| Weight |
1.1 kg |
| Dimensions |
36.5 × 27 × 11 cm |
| Unit |
1 pc.
|
|
| Weight |
0.29 kg |
| Dimensions |
35 × 14 × 0.1 cm |
| Unit |
1 pc.
|
|
| Technical Specification |
10, 10 leads patient cable for 3, 20, 25, 33591, 40 mm/mV with patient cable; auto with paddles – HR digital readout on the display 20 to 300 bpm (± 2%) – alarm: settable HR, 5, 50 mm/sec. – gain: 2.5, 50/60 Hz Memory: internal flash 4 GB up to 300 hours of ECG data, 6, automatic (10"pre and post recording) – integrated thermal printer for ECG traces and events documentation including HR/SpO2/NIBP values – paper speed: 5, base line, Display: – high contrast TFT colour LCD 5.7" (320×240 pixel) or LCD 7" (800×480 dots) – ECG through the discharge paddles (1 trace) or through 5, EMG – heart rate indicator ECG monitoring – bandwidth: 0.5 to 120 Hz (-3db) with filters off – speed: 5, events and usage review General: Dimensions: 36 x 24 x 34 cm Weight: 5.5 kg with battery, max 220 bpm Pulse oxymetry (SpO2) 33540-1-5-6-7-8-9, min 20 bpm, or 12 traces and SpO2 value Automatic change over when plugging the patient cable – filters: 50/60 Hz
|
| Standard Accessories |
Internal Li-Ion battery Printer 1 paper roll Patient cables 5 leads 2 adult and pediatric reusable paddles 2 disposable pads Manual: GB, IT Main adaptor charger
|
| Unit |
1 pc.
|
|
| Weight |
2.188 kg |
| Dimensions |
33.5 × 29 × 14.5 cm |
| Unit |
1 pc.
|
|
| Weight |
0.44 kg |
| Dimensions |
14 × 11 × 13.5 cm |
| Unit |
1 pc.
|
|
| Weight |
0.31 kg |
| Dimensions |
42 × 11 × 0.1 cm |
| Unit |
1 pc.
|
|
